Text will be sent to your number on file
AgriPaint Ceiling White Paint
Premium Finish
Our premium ceiling paint has a flat/matte sheen, has built in primer technology, and is designed to hide normal ceiling imperfections.
Paint and Primer in One
Our premium flat paint provides max coverage and superior adhesion to standard surfaces. You no longer need a separate primer for new construction or patch work, you simply apply a very light thin coat and allow it to dry for 24 to 48 hours or more before applying the top coat. The dry time is not for the paint as much for the drying of the underlying compounds.
No Chemicals, No Chemical Smell
Most paints smell bad because of the VOCs in the paint. VOCs are harmful chemicals carbon-containing substances that vaporize at room temperature and enter the atmosphere. Over time, these chemicals are be released into the air through a process called off-gassing. These chemicals have been proven to contribute to many health conditions including cancer, breathing difficulties, dizziness, headaches, fatigue, and blurred vision.
Our paint on the other hand has an earthy smell. That's because it's made with plants and clays to produce the colors. It's completely safe for use around children and pets.
Truly Green
The entire Agri lines are true zero VOC products using nothing but natural raw materials including the colorants which we make. The EPA compliance mandate defines “zero VOC” as 5 grams per liter or less of volatile organic compounds, and that only pertains to the base. Colorants are set at 120 g/l of VOCs to be called zero. Green Seal less sets their requirements at 50 g/l for paints and do not even address colorants.
The industry leaders say they are green, but the truth is they are just being compliant, NOT GREEN! Green is about reduction of petrochemical use, using sustainable and/or recycled components, improving air quality and using non carcinogen items for health. This is where we stand out in offering interior/exterior coatings that are at less than the EPA mandates for VOC’s including the colorants! Meaning that we exceed all standards for VOCs. We also use BIO materials, renewable and sustainable resources, and use recycled waste stream raw materials. This is what GREEN is all about, not just being VOC compliant like the others.
- No VOCs
- No heavy metal dryers / carcinogens
- No biocides or preservatives
- Exceeds all USDA and EPA standards
- Made from natural recycled and renewable materials from industrial waste streams
- Plant and mineral based
- Rugged durability
- Easy to apply
- Use in Bath, Kitchen and High traffic areas
- Safe for use around children and pets
- Thinning and clean up with water
Easy to Apply
Our paint works like any other interior paint. You can spray it, use a roller or brush, and you can thin it and clean up with water.
- Coverage: Coverage is 350-400 sq ft per gallon for one coat. Two coats are recommended, so coverage is halved for two coats.
- Tool Selection: Use high-quality brushes and rollers (3/8” to 1” nap). Do not use foam rollers or brush pads as they will cause bubbling and void the warranty. Horsehair or varnish brushes are recommended over some synthetic brushes that may experience clay buildup. Cotton or wool rollers are also recommended.
- Surface Preparation: Properly fill holes, seams, and repairs. All surfaces (new, existing, patched, or textured) require priming.
- Priming Technique: Apply a very thin, translucent coat of the Green Planet Paint as a primer over repairs and/or walls. Allow it to dry for 48-72 hours minimum before applying a regular coat. This is also important when changing colors (especially dark to light) to prevent bleed-through. High gloss surfaces should be lightly scuffed sanded and then primed. New construction requires priming.
- Application: Two coats are recommended. The first coat can be applied in any direction. The final coat should be rolled in a "W" pattern or vertical motion or sprayed with a vertical and horizontal back roll. Back rolling, done while the paint is still wet, is highly recommended for sprayed applications.
- Cutting In: Cut in edges and corners before applying the first and second coats.
- Thinning: The paint can be thinned with water for spraying, but usually isn't necessary. Don't over-thin.
- Spraying: Strain the paint before spraying. Ensure spray equipment is clean. Keep the spray tip wet.
- Restriction: It was NOT designed for stain blocking.
- Drying Time: Drying times vary. Wait 24-48 hours between coats (48-72 hours for trim or satin finish). Do not recoat before the paint is dry. Full curing can take up to 15 days. Don't wash newly painted surfaces for 30-45 days.
- Cleanup: Clean brushes and rollers thoroughly after use. For short-term storage (overnight or up to two days), seal them in a plastic bag and refrigerate. If hardening occurs, mineral spirits can be used to rejuvenate them, but must be fully cleaned from the mineral spirits before using them in the paints.